Products
For more information, email us at [email protected].
Large Diameter Hose Winder
- 48” Long x 36” Wide x 49” High
- Includes (2) Swivel & (2) Rigid w/ Brake Casters
Wind 100-foot sections of LDH up to 6″ wide in seconds. Having the ability to steer the winder while rolling the hose, the LDHW turns winding into a one-man operation. With no need to recharge batteries, downtime is drastically reduced. The LDHW drains the hose as you wind it, prolonging hose life. Reduces the risk of back injuries by limiting firefighter fatigue.
Large Diameter Hose Winder Trailer Hitch Mount
- Complete with 2 clevis pins that hold the hitch bar to the Large Diameter Hose Winder
- Complete with 4 screws for mounting to the Large Diameter Hose Winder
- Heavy-Duty powder coated
- MADE IN THE USA
- Hitch securing pin must be provided by customer
- Ships knocked down for freight savings
- SAFETY INFO: Both pins must be secured from the trailer hitch bar to the receiver during transportation
Pair with our Large Diameter Hose Winder to easily attach it to most trailer hitches to help organize your hose on scene.
Multiple Purpose Storage System – Hose and Cylinder Configuration
- Hose and Cylinder Configuration includes (2) SB-1 (4) VSGS-2420
Store a wide variety of equipment in a very small footprint with the Multiple Purpose Storage System. It can be configured to store 24 SCBA units, up to 32 air cylinders, up to 1,400′ of 2 1/2″ hose, or set up as a combination storage system depending on your Department.
Multiple Purpose Storage System – Hose/SCBA/Cylinder Configuration
- Hose/SCBA/Cylinder Configuration includes (3) VSGS-2420, (2) SB-1, (1) SB-2, (8) LBSC
Store a wide variety of equipment in a very small footprint with the Multiple Purpose Storage System. It can be configured to store 24 SCBA units, up to 32 air cylinders, up to 1,400′ of 2 1/2″ hose, or set up as a combination storage system depending on your Department.
Multiple Purpose Storage System – Cylinder Configuration
- Cylinder Configuration storage includes (8) VSGS-2420, (8) LBSC
Store a wide variety of equipment in a very small footprint with the Multiple Purpose Storage System. It can be configured to store 24 SCBA units, up to 32 air cylinders, up to 1,400′ of 2 1/2″ hose, or set up as a combination storage system depending on your Department.
Multiple Purpose Storage System – SCBA Configuration
- SCBA Configuration includes (24) LBSC
Store a wide variety of equipment in a very small footprint with the Multiple Purpose Storage System. It can be configured to store 24 SCBA units, up to 32 air cylinders, up to 1,400′ of 2 1/2″ hose, or set up as a combination storage system depending on your Department.
Multiple Purpose Storage System
- Hose Configuration includes (3) SB-2
Store a wide variety of equipment in a very small footprint with the Multiple Purpose Storage System. It can be configured to store 24 SCBA units, up to 32 air cylinders, up to 1,400′ of 2 1/2″ hose, or set up as a combination storage system depending on your Department. A variety ways to confirgure our multi-purpose storage system.
Mobile Hose Cart
- Holds up to 1300′ of 2 ½” hose and has a 4,400 lb. capacity
- MADE IN THE USA
- Complete with 4 heavy-duty brake casters (Stationary units also available. Deduct 5″ from overall height of unit)
- Made of heavy-duty steel with a durable red powder coat finish
- Can easily support 100′ coils
- Can be used with Hose Winder (HW-1)
- Optional cover plate (CP-31) provides a flat surface for holding bottle carriers or other items
- Ships knocked down for freight savings
Save time and eliminate back strain from carrying hose with our Mobile Hose Cart. Available in (2) sizes and in two-tier or three-tier.
Mobile Hose Cart – 72″ Three-Tier Unit
- Holds up to 2000′ of 2 ½” hose and has a capacity of 4,400 lbs.
- MADE IN THE USA
- Complete with 4 heavy-duty brake casters (Stationary units also available. Deduct 5″ from overall height of unit)
- Made of heavy-duty steel with a durable red powder coat finish
- Can easily support 100′ coils
- Optional cover plate (CP-31) provides a flat surface for holding bottle carriers or other items
- Can be used with Hose Winder (HW-1)
- Ships knocked down for freight savings
Save time and eliminate back strain from carrying hose with our Mobile Hose Cart. Available in (2) sizes and in two-tier or three-tier.
Mobile Hose Cart – 104″ Two-Tier Unit
- Holds up to 2000′ of 2 ½” hose and has a capacity of 4,400 lbs.
- MADE IN THE USA
- Complete with 4 heavy-duty brake casters (Stationary units also available. Deduct 5″ from overall height of unit)
- Can easily support 100′ coils
- Optional cover plate (CP-31) provides a flat surface for holding bottle carriers or other items
- Can be used with Hose Winder (HW-1)
- Ships knocked down for freight savings
Save time and eliminate back strain from carrying hose with our Mobile Hose Cart. Available in (2) sizes and in two-tier or three-tier.
Mobile Hose Cart – 104″ Three Tier Unit
- Holds up to 3000′ of 2 ½” hose and has a 4,400 lb. capacity
- MADE IN THE USA
- Complete with 4 heavy-duty brake casters (Stationary units also available. Deduct 5″ from overall height of unit)
- Made of heavy-duty steel with a durable red powder coat finish
- Can easily support 100′ coils
- Optional cover plate (CP-31) provides a flat surface for holding bottle carriers or other items
- Can be used with Hose Winder (HW-1)
- Ships knocked down for freight savings
Save time and eliminate back strain from carrying hose with our Mobile Hose Cart. Available in (2) sizes and in two tier or three tier.
Mobile Hose Dryer
- Made in the USA
- Built to dry hose, immersion suits, wet or dry dive gear and/or decontaminated hazmat suits
- Stores and dries up to 1200’ of 1 ½” – 1 ¾” or up to 800’ of 2 ½” – 3” hose
- Complete with 4 heavy-duty 5” casters
- Made of heavy-duty steel with red power coated finish
- Optional hangers hold turnouts, rope, webbing, slings and salvage covers
- Can be used with our Hose Winder (HW-1)
- Ships knocked down for freight savings
Equipment dries naturally and quickly, prolonging the product life! Built to be safer so no climbing is required to hang and retrieve hose.
Dry and Store Hose Rack
- Dry up to 900
- Can be used with our Hose Winder.
- Ideal for use in smaller stations.
- Ships knocked down for freight savings
Hose storage rails are 64″ long. With the Dry and Store Hose Rack, you can dry hose and store it on the same unit. Unit consists of the top mounted drying rack, where hose and other equipment dries naturally and quickly, and one lower level storage rack. Heavy duty steel construction with durable red powder coat finish.
Hose Drying Rack
- Made in the USA
- Can hold up to 600’ of 1 ½”-1 ¾” and up to 500’ of 2 ½”-3” hose
- Made from heavy-duty steel with a red powder coat finish
- Complete with (4) 5” heavy-duty swivel casters; (2) with foot-operated brakes
- Ships knocked down for freight savings
Designed to be used with our PPE & Hose Dryer (PPE-HD) but can be used separately to dry hose in your department.
Hose Winder
- Can wind tight coils or donuts in 1” – 2.5” hose
- Roller guide removes air and water as you roll on small diameter hoses
- Fits mobile, stationary or fixed racks with 2½” square tubular frame
- Optional trailer hitch mount (TM-2) allows you to attach to vehicle
- SIZE: 35.5” (39.5 at lonest point) x 24.5” x 15.5”
- Ships knocked down for freight savings
Save time and manpower with one-person operation!
Tilting Hose Turntable
- MADE IN THE USA
- 2 Heavy-duty 5” rigid casters & 1 freestanding leg
- Lock handle
- Table adjusts from a flat horizontal to a complete vertical position and anywhere in between
- Rugged steel construction with durable red powder coat finish
- Table top: 27” Diameter
- Ships knocked down for freight savings
Built to help you and your department easily roll 50′ and 100′ coils of hose.
Trailer Hitch Mount
- Pair with our Hose Winder (HW-1)
- Customer to provide standard trailer hitch pin
Easily attach our Hose winder to your vehicle for ease in rolling your hose on the go!
Cover Plate
- Can be used with our (DSHR) Dry and Store Hose Rack and our (HC) Mobile Hose Carts
- Made of heavy-duty steel with red powder-coated finish
- Made in the USA
- Hardware not provided to attach to hose racks
- Ships knocked down for freight savings
Provides a flat surface for holding bottle carriers or other items.
Red Rack Helmet/Boot Shelf – 24″ Compartments
Adjustable Shelf for Red Rack units.
Multiple Purpose Storage System – Single Compartment Hose Ledge
- 1 Pair of Single Compartment Hose Ledge
Multiple Purpose Storage System – Double Compartment Length Hose Ledge
- 1 Pair of Double Compartment Length Hose Ledge
Multiple Purpose Storage System – V-Shelf for Cylinders
- V-Shelf for Cylinders
Air Pack L-Bracket
- Composed of a back plate & foot plate and (2) Speed Clips
- All hardware for assembly and mounting is included
- Powder coated which prevents the steel surfaces from rusting and prevents damage to SCBA cylinders
- Specify bottle size (5″, 6″ or 7″) when getting this with your product (MPSS, Red Racks, SOS Racks, Etc.)
- Clips were engineered with unique rounded ends providing a smooth bearing surface to prevent gouging or marring of SCBA cylinders
- Assembly should require only a few minutes’ time with a Phillips head screwdriver and 7/16″ wrench
- Ships knocked down for freight savings
Designed to be used with our Multi-Purpose Storage System, but can easily attach to any Red Rack systems to hold department cylinders._x000D_