Ready Rack – Hose Handling, Drying & Storage

Products

For more information, email us at [email protected].

Large Diameter Hose Winder

48” Long x 36” Wide x 49” High
Includes (2) Swivel & (2) Rigid w/ Brake Casters

Wind 100-foot sections of LDH up to 6″ wide in seconds. Having the ability to steer the winder while rolling the hose, the LDHW turns winding into a one-man operation. With no need to recharge batteries, downtime is drastically reduced. The LDHW drains the hose as you wind it, prolonging hose life. Reduces the risk of back injuries by limiting firefighter fatigue.

Large Diameter Hose Winder Trailer Hitch Mount

Complete with 2 clevis pins that hold the hitch bar to the Large Diameter Hose Winder
Complete with 4 screws for mounting to the Large Diameter Hose Winder
Heavy-Duty powder coated
MADE IN THE USA
Hitch securing pin must be provided by customer
Ships knocked down for freight savings
SAFETY INFO: Both pins must be secured from the trailer hitch bar to the receiver during transportation

Pair with our Large Diameter Hose Winder to easily attach it to most trailer hitches to help organize your hose on scene.

Multiple Purpose Storage System – Hose and Cylinder Configuration

Hose and Cylinder Configuration includes (2) SB-1 (4) VSGS-2420

Store a wide variety of equipment in a very small footprint with the Multiple Purpose Storage System. It can be configured to store 24 SCBA units, up to 32 air cylinders, up to 1,400′ of 2 1/2″ hose, or set up as a combination storage system depending on your Department.

Multiple Purpose Storage System – Hose/SCBA/Cylinder Configuration

Hose/SCBA/Cylinder Configuration includes (3) VSGS-2420, (2) SB-1, (1) SB-2, (8) LBSC

Multiple Purpose Storage System – Cylinder Configuration

Cylinder Configuration storage includes (8) VSGS-2420, (8) LBSC

Multiple Purpose Storage System – SCBA Configuration

SCBA Configuration includes (24) LBSC

Multiple Purpose Storage System

Hose Configuration includes (3) SB-2

Mobile Hose Cart

Holds up to 1300′ of 2 ½” hose and has a 4,400 lb. capacity
MADE IN THE USA
Complete with 4 heavy-duty brake casters (Stationary units also available. Deduct 5″ from overall height of unit)
Made of heavy-duty steel with a durable red powder coat finish
Can easily support 100′ coils
Can be used with Hose Winder (HW-1)
Optional cover plate (CP-31) provides a flat surface for holding bottle carriers or other items
Ships knocked down for freight savings

Save time and eliminate back strain from carrying hose with our Mobile Hose Cart. Available in (2) sizes and in two-tier or three-tier.

Mobile Hose Cart – 72″ Three-Tier Unit

Holds up to 2000′ of 2 ½” hose and has a capacity of 4,400 lbs.
MADE IN THE USA
Complete with 4 heavy-duty brake casters (Stationary units also available. Deduct 5″ from overall height of unit)
Made of heavy-duty steel with a durable red powder coat finish
Can easily support 100′ coils
Optional cover plate (CP-31) provides a flat surface for holding bottle carriers or other items
Can be used with Hose Winder (HW-1)
Ships knocked down for freight savings

Save time and eliminate back strain from carrying hose with our Mobile Hose Cart. Available in (2) sizes and in two-tier or three-tier.

Mobile Hose Cart – 104″ Two-Tier Unit

Holds up to 2000′ of 2 ½” hose and has a capacity of 4,400 lbs.
MADE IN THE USA
Complete with 4 heavy-duty brake casters (Stationary units also available. Deduct 5″ from overall height of unit)
Can easily support 100′ coils
Optional cover plate (CP-31) provides a flat surface for holding bottle carriers or other items
Can be used with Hose Winder (HW-1)
Ships knocked down for freight savings

Save time and eliminate back strain from carrying hose with our Mobile Hose Cart. Available in (2) sizes and in two-tier or three-tier.

Mobile Hose Cart – 104″ Three Tier Unit

Holds up to 3000′ of 2 ½” hose and has a 4,400 lb. capacity
MADE IN THE USA
Complete with 4 heavy-duty brake casters (Stationary units also available. Deduct 5″ from overall height of unit)
Made of heavy-duty steel with a durable red powder coat finish
Can easily support 100′ coils
Optional cover plate (CP-31) provides a flat surface for holding bottle carriers or other items
Can be used with Hose Winder (HW-1)
Ships knocked down for freight savings

Save time and eliminate back strain from carrying hose with our Mobile Hose Cart. Available in (2) sizes and in two tier or three tier.

Mobile Hose Dryer

Made in the USA
Built to dry hose, immersion suits, wet or dry dive gear and/or decontaminated hazmat suits
Stores and dries up to 1200’ of 1 ½” – 1 ¾” or up to 800’ of 2 ½” – 3” hose
Complete with 4 heavy-duty 5” casters
Made of heavy-duty steel with red power coated finish
Optional hangers hold turnouts, rope, webbing, slings and salvage covers
Can be used with our Hose Winder (HW-1)
Ships knocked down for freight savings

Equipment dries naturally and quickly, prolonging the product life! Built to be safer so no climbing is required to hang and retrieve hose.

Dry and Store Hose Rack

Dry up to 900
Can be used with our Hose Winder.
Ideal for use in smaller stations.
Ships knocked down for freight savings

Hose storage rails are 64″ long. With the Dry and Store Hose Rack, you can dry hose and store it on the same unit. Unit consists of the top mounted drying rack, where hose and other equipment dries naturally and quickly, and one lower level storage rack. Heavy duty steel construction with durable red powder coat finish.

Hose Drying Rack

Made in the USA
Can hold up to 600’ of 1 ½”-1 ¾” and up to 500’ of 2 ½”-3” hose
Made from heavy-duty steel with a red powder coat finish
Complete with (4) 5” heavy-duty swivel casters; (2) with foot-operated brakes
Ships knocked down for freight savings

Designed to be used with our PPE & Hose Dryer (PPE-HD) but can be used separately to dry hose in your department.

Hose Winder

Can wind tight coils or donuts in 1” – 2.5” hose
Roller guide removes air and water as you roll on small diameter hoses
Fits mobile, stationary or fixed racks with 2½” square tubular frame
Optional trailer hitch mount (TM-2) allows you to attach to vehicle
SIZE: 35.5” (39.5 at lonest point) x 24.5” x 15.5”
Ships knocked down for freight savings

Save time and manpower with one-person operation!

Tilting Hose Turntable

MADE IN THE USA
2 Heavy-duty 5” rigid casters & 1 freestanding leg
Lock handle
Table adjusts from a flat horizontal to a complete vertical position and anywhere in between
Rugged steel construction with durable red powder coat finish
Table top: 27” Diameter
Ships knocked down for freight savings

Built to help you and your department easily roll 50′ and 100′ coils of hose.

Trailer Hitch Mount

Pair with our Hose Winder (HW-1)
Customer to provide standard trailer hitch pin

Easily attach our Hose winder to your vehicle for ease in rolling your hose on the go!

Cover Plate

Can be used with our (DSHR) Dry and Store Hose Rack and our (HC) Mobile Hose Carts
Made of heavy-duty steel with red powder-coated finish
Made in the USA
Hardware not provided to attach to hose racks
Ships knocked down for freight savings

Provides a flat surface for holding bottle carriers or other items.

Red Rack Helmet/Boot Shelf – 24″ Compartments

Adjustable Shelf for Red Rack units.

Multiple Purpose Storage System – Single Compartment Hose Ledge

1 Pair of Single Compartment Hose Ledge

Multiple Purpose Storage System – Double Compartment Length Hose Ledge

1 Pair of Double Compartment Length Hose Ledge

Multiple Purpose Storage System – V-Shelf for Cylinders

V-Shelf for Cylinders

Air Pack L-Bracket

Composed of a back plate & foot plate and (2) Speed Clips
All hardware for assembly and mounting is included
Powder coated which prevents the steel surfaces from rusting and prevents damage to SCBA cylinders
Specify bottle size (5″, 6″ or 7″) when getting this with your product (MPSS, Red Racks, SOS Racks, Etc.)
Clips were engineered with unique rounded ends providing a smooth bearing surface to prevent gouging or marring of SCBA cylinders
Assembly should require only a few minutes’ time with a Phillips head screwdriver and 7/16″ wrench
Ships knocked down for freight savings

Designed to be used with our Multi-Purpose Storage System, but can easily attach to any Red Rack systems to hold department cylinders._x000D_